Gondola Store Fixtures
E System Sales, Inc. has Gondola Store Fixtures available in two configurations. A half gondola wall shelving configuration and a gondola island fixture configurations the wall half Gondola Store Fixtures usually is placed up against a wall for stability and the Island Gondola Store Fixtures is available in a double sided configuration suitable to sit is the center portion of a merchandising floor.
The Wall or Half Gondola Store Fixture is designed to sit up against a wall and is available in heights of up to 96" and higher, depths of up to 30 inches, and is available in many colors.
A Wall Section includes one Basic Upright with Cap, one Base Shelf, one Kickplate, one Back Panel and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner.
The Double Sided of Island Gondola Store Fixture is designed to be used as an island fixture that can seporate the floor of you store dividing the store into sections and is available in heights of up to 96" and higher, depths of up to 30 inches, and is available in many colors.
A Gondola Section includes one Basic Upright with Cap, two Base Shelves, two Kickplates, two Back Panels and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner for two piece backs. Shelves Sold Separately.
Standard upper shelves available in for a 24 inch, 36 inch, and a 48 inch wide sections and available in depths of 8 inches to 30 inches deep in 2 inch increments.
Many standard and optional colors to choose from: Sahara, Chocolate, Gray, White, Black, and more.
Many different Gondola shelving units can be created our standard colors and optional colors.
EZ to install wooden canopy sections for any wall or gondola aisle sections available with lighting fixtures available.
For wall mounted shelving applications that install on 36" or 48" and use standard Madix 36" or 48" shelves and accessories. Does not have provisions for Back Panels. Installation and mounting hardware not included. Available in heights from 36" to 96". Click link for pricing.
The standard End Cap for Gondola Store Fixtures is configured using a single sided section configured to be a suitable end cap that wil provide the stability and strength to support the weight a Gondola Store Fixtures are designed to support.
Wood end panels available in either radius corner or square corners. Wire grid panels, baskets and display hooks available for Gondolas
Edge work matches the exterior finish unless optional T-Mold is ordered.
Gondola Countertops are assembled using an existing Gondola Island shelf section with a countertop and Gondola counter brackets. Wood construction with top surface and edgework finished in choice of laminates. Available in widths from 8" to 48" and lengths.
Kit contains four plated casters, two caster channels, and two “Z” stabilizer bars to create a mobile Gondola section. Plated Casters replace the Upright and Base Shoe Levelers. Hardware included.
Maximum load capacity is 600 lbs. and must be evenly distributed on both sides of the Gondola.
For safety, kit CANNOT be installed on a wall section.
Unit with integral connector inserts easily into top of shelving section Upright, set screws expand connector, solidly aligning assembly. Order one Center Spanner (SC) for 6" thru 36" and two for 48" or larger.
Maximum load capacity is 200
lb. when loaded one side only.
Office Phones -
Phone Systems -
Many different shelf styles for all types of products available for most applications and store specialties.
Gondola Store Fixtures